Electrolux dishwasher stopped draining, showing i20 or i30, or leaving dishes dirty? Always Prompt Repairs diagnoses out-of-warranty Electrolux dishwashers across Greater Brisbane, Ipswich and the northern Gold Coast. The model number and the exact code help us choose the right checks. Book a diagnosis online and tell us what happened before the fault appeared.

What i20 and i30 can mean

i20, F2 or two beeps: Electrolux describes these as a dishwasher drainage problem. A clogged filter, sink connection or drain-hose issue can be involved; the code alone does not prove the pump has failed. If the cycle has finished, switch the appliance off before checking a filter that your model manual says is user-accessible. Leave hose and pump work to a technician. See our dishwasher drainage guide.

i30: Electrolux says this indicates the anti-flood device has detected water in the base. Close the water tap and stop using the dishwasher. Do not tilt or repeatedly reset a leaking machine. Note whether water is visible around the door or beneath the unit and arrange a repair assessment.

Other error displays and flashing-light patterns vary by model. Photograph the display and send the exact code when booking; we check the relevant manual and test the machine before recommending a part.

If the dishwasher is not cleaning well

Is residue on every load, or only on the upper or lower rack? Electrolux’s cleaning guidance starts with correct loading, an appropriate programme, detergent, clean filters and clear spray arms. Check those user-facing items after switching the appliance off and follow your model manual. A recurring problem after those checks may need testing of water circulation, heating or the dispenser rather than an assumed pump replacement. Our dishwasher not cleaning guide covers the broader symptoms.

If it will not start, or it leaks

Check whether the door is fully closed and whether delay start is set. If water is leaking, switch off the dishwasher and close the supply tap if safe to do so. Do not remove cabinetry or electrical panels. Tell us whether the leak occurs during filling, washing or draining; that timing helps narrow the onsite diagnosis without guessing the failed component.

What to include with your booking

Electrolux model number from the appliance label or purchase record.
Exact code, beeps or flashing-light pattern and a photo if possible.
Whether the machine fills, drains and completes a cycle.
Whether it is integrated into cabinetry, and where any water appears.

We check model suitability and parts availability before making a repair plan. See the available appointment times and book online. A first-visit repair or particular arrival date depends on diagnosis and availability.

Charges and warranty

The standard callout is an estimated $219, including up to 30 minutes of labour onsite. Parts and further labour are additional and quoted after diagnosis, before further work. All prices are estimates only. A $20 senior, pensioner or student discount may apply. Parts supplied and installed by us carry a 12-month warranty, subject to the repair terms.

We assess out-of-warranty Electrolux dishwashers subject to model and parts availability. If your appliance may be in the manufacturer’s warranty period, contact Electrolux first to confirm coverage and the service route. Faults outside warranty terms may attract standard charges.

Frequently asked questions

Does an i20 code mean I need a new drain pump?

No. It reports a drainage problem. Filter, hose or sink-connection issues can also be involved, so diagnosis comes before a part quote.

Can I keep using an i30 dishwasher?

Stop using it and close the water tap. Electrolux associates i30 with water in the base and an active anti-flood device; the leak source needs checking.

What will the repair cost?

The callout estimate is $219 including up to 30 minutes onsite. We explain the diagnosis and quote any further labour and parts before continuing. The final amount depends on the fault; all prices are estimates until confirmed for your job.

Sources: Electrolux i20 guidance, Electrolux i30 guidance and Electrolux cleaning guidance. Use your model manual for user maintenance.