Is your oven not heating up? Whether the fan is running but the oven stays cold, the element isn’t glowing, or the temperature just won’t reach what you’ve set — it’s one of the most common oven faults we see across Brisbane. Before you call us, there are a few things worth checking yourself. And if it turns out you need a professional repair, Always Prompt Repairs can have a technician at your door fast. Book your oven repair online or call (07) 3062 2377.

DIY Checks Before You Call a Technician

Step 1: Check the Clock and Timer Settings

This catches more people than you’d expect. Many ovens have an automatic timer or clock function. If the clock has been reset (after a power outage, for example) or the timer is set to “Auto,” the oven may refuse to heat. Set the clock to the correct time and switch the timer mode back to manual. On most ovens, you’ll see a small “A” icon on the display — that means it’s in auto mode and waiting for a programmed start time.

Step 2: Check the Circuit Breaker

Head to your switchboard and check whether the oven’s circuit breaker has tripped. Ovens draw a lot of power, and a tripped breaker is a common reason for a completely dead oven. Flip it back on and try again. If it trips immediately, stop — that’s a sign of a deeper electrical fault and you’ll need a technician.

Step 3: Test the Grill Element Separately

If your oven has a separate grill function, try turning that on. If the grill heats up but the bake function doesn’t, you’ve narrowed the problem down to the bake element or the fan-forced element. This is useful information for your technician and can speed up the repair.

Common Professional Oven Faults

Bake Element Burned Out

The bottom element in your oven (the bake element) is the most common failure point. Over time, the element can crack, blister, or burn through entirely. You might see visible damage — a spot where the element has split or a small hole. When this element fails, the oven cavity won’t reach temperature on conventional bake mode.

Fan-Forced Element Failure

In fan-forced mode, a circular element at the back of the oven provides the heat while the fan distributes it. If this element fails, the fan will run but the oven will stay cold. This is especially common in ovens that are used heavily or run at high temperatures regularly.

Thermal Fuse Blown

Ovens have a thermal fuse as a safety device. If the oven overheats for any reason, the thermal fuse blows to prevent fire. Once it’s blown, the oven won’t heat at all — even if the elements are perfectly fine. A technician can test and replace the fuse, but will also check why it blew in the first place.

Thermostat Fault

The thermostat controls the temperature inside your oven. When it fails, the oven might not heat at all, or it might heat unevenly — burning food on one side while leaving it raw on the other. A faulty thermostat needs professional testing with a multimeter.

Selector Switch Failure

The selector switch (the dial or button you use to choose bake, grill, fan-forced, etc.) directs power to the correct element. If it fails, certain modes may stop working while others still function. This is a common fault in older ovens.

Control Board Issue

In modern electronic ovens, the control board manages everything. A faulty control board can cause a range of symptoms — from the oven not turning on at all, to error codes on the display, to intermittent heating. Control board repairs are more complex and often require the board to be replaced entirely.

When to Call a Professional

If your DIY checks haven’t solved the problem, it’s time to book a repair. Oven faults involving elements, thermostats, or wiring should always be handled by a qualified appliance technician — not a general electrician. We work on all major oven brands including Bosch, Miele, ASKO, Neff, Westinghouse, Fisher & Paykel, Electrolux, and more.

Need your oven fixed? Check out our full oven repair service page for more details.

Frequently Asked Questions

Why is my oven fan running but not heating?

The fan and the heating element are on separate circuits. If the fan-forced element has failed, the fan will still spin but no heat is produced. This is one of the most common oven faults and usually requires an element replacement.

Can I replace an oven element myself?

While the physical replacement isn’t overly complex, ovens are hardwired appliances that operate on high-voltage circuits. For safety and warranty reasons, element replacement should be carried out by a qualified technician.

How long does an oven repair take?

Most oven repairs are completed in a single visit within 30 to 60 minutes, provided the required parts are on hand. If a specific part needs to be ordered, we’ll arrange a return visit as soon as it arrives — usually within a few business days.

Is it worth repairing an old oven?

In most cases, yes. Oven repairs are typically far cheaper than a full replacement, and many ovens last 15 to 20 years with proper maintenance. Your technician will give you an honest assessment of whether the repair makes financial sense.

How Much Does It Cost?

Our standard call-out fee is $219, which includes the first 30 minutes of on-site labour and a full diagnostic assessment. If additional time is needed, it’s $45 per 15 minutes thereafter. Parts are quoted separately at the time of repair. We offer a $20 discount for seniors, pensioners, and students. All prices are estimates only — your technician will confirm the final cost before proceeding with any work.

Do You Carry Parts on Your Vans?

Our vans carry a range of common parts and components. For less common or brand-specific parts, we can usually source and fit them within a few business days. Your technician will let you know at the time of diagnosis whether the part is on hand or needs to be ordered.

Book Your Repair Today

Serving Brisbane, Ipswich, Northern Gold Coast, and surrounding areas. Book online or call (07) 3062 2377 — we’ll get it sorted.